Heatstrip Remote Control Timer

Heatstrip Remote Control Timer.

The Heatstrip can be controlled via a simple on/off wall mounted switch, however it is recommended to use a controller with a variable heat modulator and a timer, to give the best performance and lowest running cost.

TT-MTM wall controller:

This controller is a custom designed and manufactured controller for Heatstrip (Design, Max or Indoor). It provides both temperature control (allowing the user to turn the heat output up or down depending on the ambient temperature and conditions) and a timer for automatic heater operation.

The count down timer function has four settings. It can be 1 hour, 2 hours, 4 hours or constantly on. This is ideal when continuous heat is not required.

Depending on the ambient temperature, there may be a requirement to control the operation of the heater (standard ON position is at full power and temperature). The controller has 3 settings: High, Medium and Low.
The controller allows a combination of the multiple timer (1, 2, 4 hour or non-stop) and heat outputs (High/Medium/Low). The default operation is continuous operation at full temperature.

Controlling multiple units:

It is possible to use one wall controller to control multiple heaters. The wall controller is rated at 14 Amps and 220-240 volts. If connecting multiple units ensure one unit is connected directly to the controller and the others are connected using a contactor.

Manufacturer: Grandhall